1-Johnson-Van Vlaanderen 17” Lab Calender, 4-Roll, S/R/S/S, 2-Electric Heated Roll, Digital Readout for Speed, DC 180 Volt Stk. #A-6239

1- Perkins 64” Calender, 2-Roll, (2) Roll Steel (Chrome Plated), 66” x 16” Dia., Drilled for Gas (No Gas Equipment), 1-Roll Nylon sleeve 64” Wide x 22” Dia., Motor 30 HP, 208/230/460 Volt, 3 Ph, 1775 RPM, FR 286 TC. Stk. #CO-7704

1- Perkins 66” Calender, 3-Roll, S/R/S, Hydraulic, Steam Heated, 64” Working Width, 15-40-Ton. Stk. #C-6304

1- Perkins 80” Embossing Calender, Mdl. H5551, 7 ½ HP, Youngstown-Miller Heat Controls. Stk. #CO-6731.

1- Perkins 96” Calender, 3-Roll, C-Face, Rated 98” Width, 96” Working Width, Steel Filled Polished Steel Top & Bottom Rolls, Each 20” Dia., Steam-Heated, Open-Geared 4-Sprocket Heavy Duty Chain Drive System w/ Chains, Partly Hydraulic Roll Adjustment, Partly Chain Driven Motorized Adjustment w/ Bottom Roll Right Angle Reduction Gear Drive Arrangement w/ Motor 1 HP / 1725 RPM / 230-460 Volt, Controller Panels & Switchgear. Stk. #C-6572.

1- Perkins 110" Calender, 3-Roll Polishing, 50 HP, 550 Volt, 111" Filled / 110 1/2" Steel Roll / 111" Filled, 1 1/4" Steam Pipe, Menzel A-Frame Batcher. Stk. #C-1609.

1- Verduin 21" Schreiner Calender, Yr. 1961, 3 HP, 220/440 Volt, Top Roll 21" Schreiner w/ Electric Heat, Bottom Roll 20 1/2" Filled, US Vari Drive, 6.3 - 63.2 RPM, Electric Heat Temp. 250 / 450 F., Hydraulic.
Stk. #C-1059.

1- Verduin 80” Calender, Chintz, 3-Roll, Steel / Filled / Steel, Gas Fired, Let Off Stand w/ Horton clutch, Take Up Stand, Hydraulic, Baldor 60 HP Motor, 1750 RPM. Stk. #CO-7738

1- Verduin 104" Calender, 2-Roller Chintz, 20 HP, 220/440 Volt, 1160, Chrome Finish To Top Roll, Paper Roll Bottom, Roller Bearing, Gas Heated Top, Main Drive is 115 RPM Max., 19.2 min. w/ Gear Ratio 17.8:1. Stk. #C-1074.

1- Verduin 104” Calender, 2-Roll, Schreiner, 1-Paper Roll, 23” Dia., 1-Steel Roll, 15” Dia., Gas Heated, 100-Ton, 20 HP Reeves Vari-Speed, 220/440 Volt, Stk. #CO-1343.

1- Calender 69 ½” Calender, 3-Roll, 69 ½” x 18” Dia. Rubber, 72” Stainless Roll x 8” Dia. Control box, Motor 15 HP, 230/460 Volt. Stk. #C-6646.